Cam Lock Couplings provide a means
of rapid connection & disconnection
between Hoses & Pipelines in any
fluid Transfer System.
Cam
Lock Couplings essentially
constitute of two major components,
namely Coupler and Adopter. The
Couplers and Adopters may be screwed
or welded on to the ends of the
hose/pipe line. Connection is then
made by inserting the Adopter into
the coupler, then pressing down
(closing) the Cam arms of the
coupler. The Cams engage into the
groove in the adopter forcing the
adopter against the gasket in the
coupler to form a seal.
TECHNICAL SPECIFICATIONS OF
CAMLOCK COUPLINGS :-
Cam Lock Couplings are generally
made as per our Drawings &
specification given.
SIZES OF CAMLOCK COUPLINGS:-
Cam Lock Couplings are available in
following sizes; ½", 3", 4", 1",
1.1/2". 2", 3", 4", 5", 6" Higher
sizes are also available upon
request.
END CONNECTIONS OF CAMLOCK COUPLINGS
:-
Various end connections are
available as per the requirement
of the system such as: Female
threads Male Threads, Butt Welded,
Flange Connection, Hose Nipple.
SEALING MATERIAL (GASKETS)
:-
Depending upon the operating
conditions such as temperature and
the nature of fluid sealing
material is chosen, Normally used
sealing materials are : Nitirile,
EPDM rubber, Viton, silicon.
MATIERALS OF CONTRUCTION
OF CAMLOCK COUPLINGS
:-
A wide range of material depending
upon the usage and customer's
requirement are available such as:
Camlock Couplings
